Nitrogen Generator for LC-MS / LC-MS-MS

Product Code: NITROGEN GENERATOR FOR LCMS / LCMS MS
$0.00
Ex Tax: $0.00

• Nitrogen Generator produces a continuous flow of high purity Nitrogen at selected pressure.
• The modular pressure swing adsorption (PSA) unit operates with alternating pressure increase and decrease.
• Untreated air flows under pressure through the reaction towers containing carbon molecular sieves adsorber. Moisture, CO, CO2, THC, O2 and other unwanted components in the air are adsorbed, leaving Nitrogen Gas of required purity.
• During the desorption cycle, the trapped substances adsorbed are released again at low pressure and the adsorber is ready for next cycle.
• Flow range available from 10 LPM to 30 LPM and above.
• Microcontroller digital display

Technical Specification

PRINCIPLE SPECIFICATIONS For LC-MS (NG-02L) For LC-MS-MS (NG-02LS (for Sciex model)
Moisture 5 ppm 5 ppm
Total Hydro Carbon < 0.5 ppm < 0.5 ppm
CO & CO2 < 2 ppm < 2 ppm
Purity 99.9% > 99.99%
Micro Particulates < 0.01µ < 0.01µ
Capacity of N2 Generator 6 to 30 LPM at 100 psig (as per selection of model) 12 LPM at 100 psig (filtered zero air)
8 LPM at 60 psig ( purified dry air)
4 LPM at 60 psig (pure nitrogen)
Method of purification Pressure Swing Adsorption (PSA) Pressure Swing Adsorption (PSA)
Room temperature 5 °C - 25 °C 5 °C - 25 °C
Start up time 1 hrs / programmable timer 1 hrs/ programmable timer
Electrical requirements without Compressor 230 V AC, 50 Hz, 1 Ph, 2 Amp 230 V AC, 50 Hz, 1 Ph, 2 Amp
Dimension of N2 Generators in mtr.(without compressor) 1.5H x 0.8W x 0.8D (approx)
750H x 400W x 1000D mm
(as per selection of model)
2H x 1W x 1D (approx)
750H x 400W x 1000D mm
(as per selection of model)
Net Weight (without compressor) (approx.) 100 kg - 200 kg  
(as per selection of model)
100 kg - 200 kg
(as per selection of model)

 

  

Write a review

Note: HTML is not translated!
Bad           Good